Flying Skull's Carbon Copy is a super-concentrated, liquid ready-to-use, professional rooting solution for cloning plants, for use with Rockwool, Plugs, Cubes, Soil and Aero Cloners.
Carbon Copy rooting solution is different from other rooting compounds because rooting gels and powders need to be in contact with the clone’s stem for extended periods of time to work properly, but because Carbon Copy is a liquid formula that works fast, there's no need to worry about accidentally wiping it off, using too little or not enough. It quickly penetrates stem cells and once it is in the plant, it can’t be washed or rubbed off.
It’s easy to use. Simply pour the Carbon Copy rooting solution into a shallow container, dip the cutting or clone into the solution and then plant it in your favorite medium. Please refer to the label for usage directions. We recommend only dipping the stem to the level where you want roots, as roots will form wherever the solution has been in contact with the stem.
In the past, cloning machines got a bad name. This was because rooting gels and powders quickly washed off the clones and contaminated the water. The contaminated water then formed a slime that stuck to stems and plastic surfaces, which made it almost impossible to get good plants growing. The use of Carbon Copy rooting solution in cloning machines will not lead to slime forming in the water, making it ideal for large batch cloning.
Directions for Use:
Ready to use. Do not dilute.
1. Take a cutting from the plant, newer growth is preferred.
2. Pour Carbon Copy into a small container.
3. Dip the cutting’s stem into the solution. If possible, allow at least one node with no leaf to be submerged for 3-5 seconds for softwood, 10-30 seconds for hardwood. Annual/single season plants are considered soft wood plants.
4. Place the cutting into a wet, but not soaked, medium (rockwool, plugs, etc).
If possible, spray leaves with Flying Skull's Clone Guard or increase area humidity to keep the clones from wilting.
For best results, bottom-heat rockwool, plugs, soil, etc to 21°-24° Celsius and keep medium wet, but not soaked.
If possible, treat any water used during and after the cloning process with Flying Skull's Z7.
|Active Ingredients||By Weight|
Storage and Disposal:
Do not contaminate water, food or feed when storing or disposing of this product.
Store at room temperature.
Keep out of direct sunlight.
Place in a locked storage area.
Store in original container.
Once empty, do not reuse or refill this container.
Never place unused products down any indoor or outdoor drain.
Do not mix with oxidizing chemicals.
Limited Warranty and Disclaimer:
Buyer assumes all responsibilities for safety and use not in accordance with label directions.
Can be hazardous to humans and domestic animals.
Not for human consumption, do not ingest.
Avoid contact with skin, eyes or clothing.
We suggest wearing gloves and covering the face to avoid absorbing through skin or inhaling the product.
Causes moderate eye irritation.
Remove and wash contaminated clothing before reuse.
Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet.
Made in the USA.